Permabond 790 is a low viscosity, surface insensitive adhesive that is the ideal adhesive for high-speed production lines.
PERMABOND® 790 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers are also rapidly bonded. The fast cure minimizes the occurrence of frosting and fogging. The wicking viscosity of this product makes it ideal for post-assembly application.
Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. Strong bonds are developed extremely fast and on a great variety of materials. These properties make PERMABOND® cyanoacrylates the ideal adhesives for high speed production lines.
NB: For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with Permabond Polyolefin Primer (POP).
This product is not recommended for use in contact with strong oxidizing materials and polar solvents although will withstand a solvent wash without any bond strength deterioration. Users are reminded that all materials, whether innocuous or not, should be handled in accordance with the principles of good industrial hygiene. Full information can be obtained from the Safety Data Sheet.
Storage Temperature
Allow adhesive to reach room temperature before opening bottle to prevent condensation inside the bottle which can reduce shelf life.
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
To request any type of technical sheet or safety sheet.
To request any type of technical sheet or safety sheet.
Our technical team can provide assistance on your industrial product or application needs. Please complete the enquiry form below and we will contact you within 24-48 hours.
Please send us your request to receive a customised offer, either for specific products or special requirements.
Please fill in the form to receive the .pdf document.
