Resins, pastes and adhesives to protect, improve operation and prolong the life of electronic and electrical appliances.

  • Resins: 2-component resin systems designed to pot, encapsulate and insulate electronic circuits and components. They protect them from moisture, vibration, temperature, chemicals and environmental conditions in general.
  • Heat-conductive pastes: Materials that do not cure and help in the successful dissipation of heat in electronic and electrical devices.
  • Adhesives: A wide range of industrial adhesives and high quality sealants for the assembly of electronic and electrical appliances.
  • Conformal Coatings: Applied in a very thin layer on the printed circuit boards to protect them from moisture and environmental conditions.

Encapsulation Resins

Electrolube UR 5604 – Black Elastic Polyurethane Resin

  • General purpose resin for potting and encapsulating
  • Elastic (Shore A75)
  • Slow curing (40 min. Pot Life, 24 hours Cure Time)
  • Ideal for a wide variety of challenging environments
  • UL approval:  UL94 V-0
  • Service Temperature: -50oC-130oC
  • Colour: Black
  • Packaging: 250ml, 5kg, 25kg

Electrolube ER 2188 – Black Hard Epoxy Resin

  • General purpose epoxy resin, cost effective protection.
  • Hard (Shore D85)
  • Slow curing (60 min. Pot Life, 24 hours Cure Time)
  • Offers protection in a wide range of conditions, external environment, water.
  • UL approval: UL94 V-0
  • Service Temperature: -40oC-120oC
  • Colour: Black
  • Packaging: 250ml, 5kg, 25kg

Dow Sylgard 160 – Elastic Silicone Resin

  • Silicone encapsulation resin for electronics
  • Very Elastic (Shore Α56)
  • Slow curing (20 min. Pot Life, 24 hours Cure Time)
  • High resistance to weather/UV, suitable for a range of environments and water.
  • UL approved to: UL94 V-0
  • Service Temperature: -45oC-200oC
  • Colour: Gray
  • Packaging: 10,8kg , 49,8kg

Dow Sylgard 170 – Elastic Silicone Resin

  • Silicone encapsulation resin for electronics
  • Very Elastic (Shore Α47)
  • Slow curing (15 min. Pot Life, 24 hours Cure Time)
  • High resistance to weather/UV, suitable for a range of environments and water.
  • Approval: UL94 V-0, millitary and railway approvals.
  • Service Temperature: -45oC-200oC
  • Colour: Gray
  • Packaging: 10 kg, 40 kg

Thermal Pastes

Electrolube HTC – Non-Silicone Paste

  • Non-Silicone Heat Transfer Compound
  • Non-drip
  • Thermal Conductivity (Guarded Hot Plate): 0.9 W/m.K
  • Service Temperature: -50oC up to 130οC
  • Colour: White
  • Packaging: Cartridge 10X35ml, Can 1kg

Electrolube HTS – Silicone Paste

  • Silicone Heat Transfer Compound
  • Non-drip
  • Thermal Conductivity (Guarded Hot Plate): 0.9 W/m.K
  • Service Temperature: -50oC up to 200οC
  • Colour: White
  • Packaging: Cartridge 10X35ml, Box 1kg

DOW 340 – Silicone Paste

  • Silicone Thermally Conductive Compound
  • Non-drip
  • Thermal Conductivity (Guarded Hot Plate): 0.67 W/m.K
  • Servive Temperature: -50oC up to 177οC
  • Colour: White
  • Packaging: Tube 100gr, Pail 10 kg

Electrolube HTSP – Silicone Paste with high thermal conductivity

  • Silicone Heat Transfer Compound
  • Non- drip
  • Thermal Conductivity (Guarded Hot Plate): 3 W/m.K
  • Service Temperature: -50oC up to 200οC
  • Colour: White
  • Packaging: Cartridge 10X35ml, Box 1kg

Conformal Coatings

Electrolube AFA – Acrylic Conformal Coating

  • Transparent Coating, ideal for LED applications
  • Formulated without the use of hazardous aromatic solvents.
  • Fast touch dry time at room temperature (Touch dry 5-10 min.)
  • Approval: UL94 V-0, UL746
  • It can be removed with special solvents
  • Contains a UV trace, for inspection of the coating for complete and even coverage.
  • Service Temperature: -65°C to +125°C
  • Packaging: Spray 200ml, Pail: 5lt

Electrolube PUC – Polyurethane Conformal Coating

  • Transparent, clear amber with high abrasion resistance.
  • Good resistance to chemicals and temperature extremes.
  • Medium curing speed: (40-45 min. touch dry)
  • Approval: UL94 V-0
  • It can be removed with special solvents.
  • Contains a UV trace for inspection of the coating for complete an even coverage.
  • Service Temperature: -55°C to +130°C
  • Packaging: Spray 400ml, Pail: 5lt

Electrolube DCA SCC3 – Alkyd Conformal Coating

  • Transparent, elastic coating.
  • Good resistance to chemicals and temperature extremes.
  • Medium curing speed: 50-55 min. touch dry
  • Approval: UL94 V-1, UL746E, DEF-STAN 59/47
  • It can be removed with special solvents
  • Service Temperature: -70°C to +200°C
  • Packaging: Spray 400ml, Pail: 1lt, 5lt

Electrolube DCT – Thinner for Coating DCA SCC3

  • Special solvent for use with alkyd coating DCA SCC3
  • Reduces the viscosity of the coating
  • For easy use in spray or dip applications
  • Used at a ratio of approximately 2:1 (Solvent: Coating)
  • Packaging: Pail 1lt, 5lt

Adhesives

Dowsil 7091 – Silicone Adhesive and Sealant

  • Neutral silicone, odourless, non corrosive to metals.
  • High strength bonding to most materials
  • Colours: White, Black, Grey
  • Service Temperature: -50οC up to 180οC
  • Packaging: Cartridges 310ml, Pail 20lt

Dowsil AS 7096 N  – Silicone Adhesive and Sealant

  • Neutral silicone, odourless, non corrosive to metals
  • Low modulus, contains fungicide
  • Colours: Transparent
  • Service Temperature: -50οC up to 150οC
  • Packaging: Cartridges 310ml, Pail 20lt

Dowsil AP – Silicone Adhesive and Sealant

  • Acetoxy silicone
  • Good adhesion to many substrates
  • Colours: White, Black, Grey
  • Food contact approval (FDA 177.2600) Military approval (MIL-A-46106)
  • Service Temperature: -50οC up to 180οC (205οC for a short time)
  • Packaging: Cartridge 310ml, Pail 20lt

Permabond 792 Cyanoacrylate – General purpose

  • Bonds a great variety of materials
  • Extremely fast setting (2-3 sec)
  • Low viscosity
  • Substrates: Rubber, Plastics (pvc, abs, acrylic), Metals (aluminium, inox, steel)
  • Colour: Transparent
  • Service Temperature: -55 up to 120οC
  • Packaging: 20gr, 50gr, 500gr

Permabond 790 Cyanoacrylate – Wicking grade

  • Extremely fast setting (2-3 sec)
  • Wicking grade
  • Substrates: Rubber, Plastic (pvc, abs, acrylic), Metals (aluminium, inox, steel)
  • Colour: Transparent
  • Service Temperature: -55 up to 80οC
  • Packaging: 20gr, 50gr, 500gr

Κόλλα Permabond 2011 – Gel

  • Fast cure (5-10 sec)
  • Gel, easy to apply and dispense
  • Substrates: Rubber, Plastics (pvc, abs, acrylic), Metals (aluminium, inox, steel)
  • Colour: Transparent
  • Service Temperature: -55 up to 120οC
  • Packaging: 20gr, 300gr