Dynabrade 14000 – Dynafile Abrasive Belt Tool

Dynabrade 14000 is a pneumatic belt sander designed for 24″ Long Belts, the world famous Dynafile is designed to reduce tedious hand filing and sanding. Grind, deburr, blend, polish, or finish in areas as small as 3/8″ diameter. Use the platen pad or contact wheel, its your choice. Easy to use and learn, the Dynafile is the perfect finisher or polisher. For applications requiring heavy grinding or contour polishing, the 14000 Dynafile is capable of mounting hard or soft platen pads onto its included Contact Arm for less or ore material removal as needed. Lightweight and easily movable, the composite belt guard was created for quick and easy belt changes. Ideal for workpiece materials of aluminum, steel, plastic, fiberglass, composites, rubber, glass, and stone. Known as the Best Tracking Abrasive Belt Tool, the Dynafile has a motor that easily adjusts to the most comfortable throttle lever position.

Features

• Front Exhaust
• Straight-Line
• Motor hP (W): 0.5 (373)
• Motor RPM: 20,000
• Sound Level: 77 dB(A)
• Abrasive Belt Size Inch (mm): 1/8-1/2 (3-13) W x 24 (610) L
• Max. Air Flow SCFM (L/Min): 31 (878)
• Max. SFPM (SM/Min): 5,800 (1,768)
• Weight Pound (kg): 3.1 (1.4)
• Length Inch (mm): 14.6 (371)
• Height Inch (mm): 4.6 (116)
• Made in USA

Storage & Handling

• Use of tool rests, hangers and/or balancers is recommended.
• Protect tool inlet from debris (see Notice below).
• Do Not carry tool by air hose or near the tool throttle lever.
• Store accessories in protective racks or compartments to prevent damage.
• Follow the handling instructions outlined in the operating instructions when carrying the tool and when changing accessories.
• Protect accessories from exposure to water, solvents, high humidity, freezing temperature and extreme temperature changes.

Installation

• To ensure long life and dependable service, use a Closed Loop Air System and Filter-Regulator-Lubricator (FRL) as diagramed below.
• Each tool should have its own dedicated hose connected to an air supply FRL. Quick disconnects should be installed at the FRL in an effort to reduce contamination into the tool. Securely affix all fittings and hose assemblies.
• It is strongly recommended that all Dynabrade rotary vane air tools be used with a Filter-Regulator-Lubricator to minimize the possibility of misuse due to unclean air, wet air or insufficient lubrication. Dynabrade recommends the following: 10690 Air Line Filter-Regulator-Lubricator — Provides accurate air pressure regulation, two-stage filtration of water contaminants and micro-mist lubrication of pneumatic components.
• Dynabrade recommends 1 drop of air lube per minute for each 20 SCFM (example: if the tool specification states 40 SCFM, set the drip rate on the filter-lubricator to 2 drops per minute). 95842 Dynabrade Air Lube is recommended.