DCT is a high purity solvent blend designed for reducing the viscosity of a number of Electrolube Conformal Coatings.
DCT is a high purity solvent blend designed for reducing the viscosity of a number of Electrolube Conformal Coatings, including:
The primary use of DCT is to dilute and maintain the viscosity of coatings for use in dip and spray coating applications.
When solvent based coatings are sprayed, high pressure at the nozzle forces the solvent within the coating to evaporate quickly. Therefore, to avoid cob-webbing (i.e. the coating drying immediately as it leaves the spray gun), extra solvent must be added.
DCT should be used at a ratio of approximately 2:1 (Coating:Thinners) depending upon the application. The thinned solution should be stirred thoroughly and allowed to stand. All air bubbles must be allowed time to disperse before attempting to spray. Thinners should be added gradually until the desired spray pattern and coating weight is achieved.
DCT must be used to maintain the viscosity of coatings in open tanks used in dip coating processes. Over time, the solvent within the coating evaporates. This increases the viscosity and produces a thicker coating. This solvent loss must be replaced to maintain the correct viscosity and provide a consistent coating thickness.
The amount of DCT to be added depends on the total volume of the tank, ambient temperature and rate of use. DCT should be added slowly, allowing the viscosity of the coating to alter prior to adding additional thinners.
DCT is a flammable solvent blend and should be used in a well-ventilated area. All sources of ignition must be avoided. Please refer to the separate Health & Safety Data Sheet for further details.
DCT thinners may also be used to clean metal equipment found in the application process to include spray guns and other equipment involved.
To request any type of technical sheet or safety sheet.
To request any type of technical sheet or safety sheet.
Our technical team can provide assistance on your industrial product or application needs. Please complete the enquiry form below and we will contact you within 24-48 hours.
Please send us your request to receive a customised offer, either for specific products or special requirements.
Please fill in the form to receive the .pdf document.
