Permabond® A1046 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and threaded components. It exhibits high strength and excellent durability, even under the most arduous conditions.
Though the anaerobic adhesives will tolerate a slight degree of surface contamination, best results are obtained on clean, dry and grease free surfaces. The use of a suitable solvent-based cleaner (such as acetone or isopropanol) is recommended. In general, roughened surfaces (~25μm) give higher bond strengths than polished or ground surfaces. To reduce the curing time, especially on inactive surfaces (such as zinc, aluminium and stainless steel), the use of Permabond A905 or ASC10 can be considered.
1) Apply a circumferential bead; preferentially to the female component. Assemble with a twisting action.
2) For larger components use thixotropic products to prevent run off.
3) Take care to ensure adhesive does not enter ball races or other mechanisms.
To request any type of technical sheet or safety sheet.
To request any type of technical sheet or safety sheet.
Our technical team can provide assistance on your industrial product or application needs. Please complete the enquiry form below and we will contact you within 24-48 hours.
Please send us your request to receive a customised offer, either for specific products or special requirements.
Please fill in the form to receive the .pdf document.
