Permabond MT382 Flexible Epoxy Adhesive

Applications

• It has excellent adhesion to Nylon, ABS, Polycarbonate, and other plastics as well as a variety of different metals.

Features

• When cured, this adhesive is soft and flexible
• Adhesion to a wide variety of substrates
• Full cure at room temperature
• Easy to apply
• Self-levelling

Surface Preparation

• Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces.
• Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Directions for Use

1. The adhesive should be dispensed from the cartridge via the nozzle supplied (this can be cut to give the appropriately sized bead to cover the bond area).
2. Apply the adhesive to one surface and avoid entrapping air.
3. Assemble parts applying sufficient pressure to ensure the adhesive spreads to cover the entire bond area.
4. Use a jig/clamp to prevent parts from moving during cure.
5. It is advisable not to disturb the joint until the adhesive is fully cured.
6. Cure with heat – see page one for cure schedule.